Slim internal speaker driver for notebook
Pilot runs start at 500pcs, standard batches at 3,000pcs, custom tooling at 10,000pcs. Stock ships in 3-5 days, samples in 7, custom tooling in 15-20 days. Selection proposals return within 24 hours, datasheet review within 48. XDEC has manufactured speaker drivers since 2009, holding ISO9001:2015 and IATF16949.
Thin-and-light programs keep pushing internal height down, and the speaker is usually the first part asked to give up space. A 16×9mm (0.63×0.35 inch) driver at 3.5mm thick fits where a conventional unit cannot. The question is what that costs you in output.
Reading the Spec Sheet on a Thin Driver
Sensitivity is the number that matters most here. This unit reaches 90±3dB at 7Ω with 0.5W rated and 1W peak, which means usable volume from a small amplifier. F0 sits at 1120Hz±20%, and that figure tells you where the low end stops.
| Spec | Value | Why It Matters |
|---|---|---|
| Dimensions | 16×9×3.5mm | Fits shallow hinge and deck areas |
| Impedance | 7Ω | Check against your amp, not a generic 8Ω assumption |
| Rated Power | 0.5W (1W peak) | Design headroom around rated, not peak |
| Sensitivity | 90±3dB | High for the size, keeps amp draw low |
| Resonance F0 | 1120Hz±20% | Expect limited bass below this point |
That F0 figure deserves attention before you commit. At 1120Hz, reproduction below roughly 1kHz falls off, so music and video sound thin unless the enclosure adds help. This is physics, not a defect, and it applies to every driver this size.
What You Trade Away
Going thin buys mechanical freedom and costs acoustic headroom. The comparison below is how we usually frame it during selection.
| Factor | Thin Driver (16×9mm) | Taller Driver (24×15mm) |
|---|---|---|
| Thickness | 3.5mm | 4.2-4.4mm |
| Sensitivity | 90±3dB | 90-92±3dB |
| F0 | 1120Hz | 710-1000Hz |
| Bass output | Limited | Noticeably fuller |
| Best fit | Height-constrained designs | Where 4mm+ is available |
If your housing allows 4mm or more, a taller driver usually sounds better for the same spend. The thin unit earns its place when the mechanical team has already spent the height budget elsewhere.
Where These Drivers Land
Beyond notebooks, this footprint shows up in wearables, portable conferencing devices, and handheld terminals. The 7Ω winding suits battery-powered designs that need output without a large amplifier stage.
| Application | Requirement | Note |
|---|---|---|
| Ultrabooks | Minimal height | Pair two per device, match within ±1.5dB |
| Smart wearables | Low power draw | 90dB sensitivity helps battery life |
| Portable conferencing | Voice clarity | Tune for midrange, not bass |
| Handheld terminals | Alert tones | Narrow band is sufficient |
Related Products
16×9mm Micro Speaker Driver 7Ω 0.5W/1W
17×12mm Ultra-thin Driver 8Ω 1W/1.2W
15×11mm Micro Speaker Driver 7Ω 1W
FAQ
| Question | Answer |
|---|---|
| What is the MOQ? | 500pcs pilot, 3,000pcs standard, 10,000pcs custom tooling. |
| Can you adjust impedance? | Yes. Winding changes are part of OEM/ODM work and affect lead time. |
| How soon can we get samples? | 7 days for pilot quantities, 15-20 days if tooling is involved. |
| Do you provide pairing? | Yes, batches are sorted into ±1.5dB tiers for stereo builds. |
| What files come with the quote? | Datasheet with SPL curve, dimension drawing, and load test results. |
Contact Us
XDEC covers 7 product families from Φ3mm to Φ324mm, with over 2,000 models shipped across 17 years and exports to 30+ countries. Selection proposals return within 24 hours.
Contact Manager Yuan at +86 135 2888 3307 or xd12@xdec.cn. Send dimensions, impedance, power, and target device for a faster quote.