30*24.7mm 2watt Multimedia Speaker Driver
Model No.: XDEC-45Y-1
Part I. Introduction
16-8-22mm-2watt-multimedia-speaker
This is our soundbox product,consist of miniature 30mm Mylar Speaker driver and white plastic housing,soldering wires for connect.You just need add PCB board,this products can play sound!Quite save research time and cost,earn time for your new design come to market!34.3*8.8mm size passive Sound Box speaker nominal impedance 8OHM,rated power 1watt,max power 1.5watt,F0 1700Hz,frequency range F0~7K.Distortion Less than or equal to 5%.This soundbox speaker driver power just 1-1.5w,save energy,SPL is about 94.Our this soundbox can be use in many sound products.Portable device,monitor system,security system,fingerprint lock,walkie-talkie and so on.
Application
Smart speaker,Smart home application,Car audio system,Mini projector,Advertising players,Digital Photo Frame,Teaching Tablet etc.
Part II. Dimension
Part III. Technical parameters
|
NO. |
Item |
Specification |
Condition |
|
1 |
Dimensions |
Φ 34.3*8.8Hmm |
|
|
2 |
Nomial Impedance |
8±20% OHM |
DCR 8.2±15%Ω |
|
3 |
Input power |
Rated:1W/ Max:1.5W |
At 2.83V /3.46V |
|
4 |
Resonance Frequency |
1700±20%Hz |
At 0.89V |
|
5 |
S．P．L． |
94±3 dB(0.1W/0.1M) |
At F0-20K Hz (Average) |
|
6 |
Frepuency Range |
F0~7KHZ |
Output S.P.L. -10dB |
|
7 |
Distortion |
5%Max |
At 3.0 KHz 0.1W/0.1M |
|
8 |
Buzze & Rattle |
Not be audible sine wave between at 2.83V /F0~5KHz. |
|
|
9 |
Polarity |
Diaphragm shall move forward. |
|
|
10 |
Load test |
Must be normal after load test:white noise 48 hours. |
|
|
11 |
High TEMP test |
After having been in a test chamber for 48 hours at the condition of +60 ℃ 20~25%R.H and keep 2 hours. |
|
|
12 |
Cold TEMP test |
After having been in a test chamber for 48 hours at the condition of －25℃±3℃ and keep 2 hours. |
|
|
13 |
Humidity test |
After having been in a test chamber for 48 hours at the condition of +40 ℃ 90~95%R.H and keep 4 hours. |
|
|
14 |
Drop test |
The speak shall be dropped 2 times, clause 8 shall be satisfied. |
|
|
15 |
Weld |
terminal weld: 350℃/≤2~3sec*2bit. |
|
|
16 |
Store temp |
Minus 25℃ To +60℃ |
|
All the above parameters can be adjusted or customized according to customer requirements.
Part IV. Our company
Established in 2009 as a domestic well-known electro-acoustic enterprises, Shenzhen Xuanda Electronics Co.,Ltd(XDEC) has been specializing in R&D, manufacture and marketing of various speaker, receiver, microphone and other electro-acoustic products which are widely applied in headphones, mobile phones, walkie-talkies, point-and-click pens, learning machines, Cordless telephone, laptops, portable dvds, TV, navigation devices, building security, car audio-visual, mini-audio and other consumer electronics products as well as communications equipments etc.
2015, successfully passed ISO9001:2008 quality management system
2017, won the Shenzhen high-tech Enterprise Certificate and passed the Rhine TUV certification
2018, passed ISO9001:2015 quality management system and ISO14001:2015 Environmental Management System Certification
2023, obtained IATF16949 automotive industry quality system certification
Located in Shenzhen and neighboring the lung tai highway, Nanguang Highway, Guangmingcheng Station ,which make it naturally owned convenient transportation and beautiful environment. XDEC has over 200 employees,and regarded as trustworthy partners of many domestic and oversea customers by its strong R&D capabilities, high-grading quality and excellent service. The company has always taken technical innovation as the driving force of the company's sustainable development, from product parts development to product assembly integration, to provide customers with a full range of product design and engineering services, to ensure product quality and excellent sound quality.
XDEC has been adhering to the"Integrity, quality, innovation, service" business philosophy,strictly controlling every process
of the production, high attention to production equipment, quality and R & D investment, vigorously introduce advanced production equipment and independent R & D equipment to meet customer needs, adhere to independent innovation, Excellence, committed to in-depth R&D more perfect electro-acoustic products. Willing to cooperate with friends from all walks of life, hand in hand, create brilliant.
Part V. Some of our partners
Part VI. FAQ
Q1. What is the MOQ?
Q2.Do you support OEM and ODM services?
Q3. What are the payment methods?
Q4. What are the payment terms?
Q5. Can I get some free samples before mass production?
Q6. How long can I get the samples?
